Perstorp Archives | Market Krystal

Perstorp Backs EU Mass Balance Rules for Traceable Chemical Feedstock Claims

admin — Mon, 19 Oct 2026 00:00:00 +0000

The European Union has adopted the first harmonized definition and calculation rules for mass balance accounting under the Single-Use Plastics Directive, setting requirements for chemical and physical traceability. The rules cover chemical traceability, no overcompensation, site-level physical traceability, and a fuel-use exclusion. Perstorp says its Traceable Mass Balance approach, supported by ISCC PLUS-certified products, aligns with the framework, which it sees as a precedent for PPWR and other product groups.

Why it matters

The rules tighten how renewable and recycled feedstock claims can be attributed to chemical products, which may shape customer demand for traceable, certified material across European value chains.

Key facts

Companies	Perstorp, PCG SC, BRB, PCG Specialty Chemicals
Timing	19 October 2026
Partners	customers, brand owners, industry partners, certification bodies
End uses	single-use plastics, PPWR product groups, consumer product claims
Chemicals	Pentaerythritol, Polyols (renewable and recycled feedstock-based)

Market context

Mass balance accounting is a method for attributing renewable or recycled feedstock to chemical products when the physical material cannot be kept separate throughout production. Companies blend such inputs with conventional feedstock, then allocate the sustainable share to specific outputs on paper, which lets producers supply certified grades without dedicated process lines. Demand for these grades is driven mainly by packaging, consumer goods and automotive brand owners that want to meet recycled-content and carbon-reduction targets. Clear, harmonized calculation rules reduce disputes over what a claim means and make it easier for buyers to compare offers. For producers of specialty chemicals and polyols, tighter rules tend to favor suppliers that can document chain-of-custody through recognized certification schemes, while smaller suppliers may face higher compliance costs. Over time, such frameworks can shift pricing toward verified material and influence which product families receive premium positioning.

Source: official release on perstorp.com. Summary and context written by Market Krystal.

The post Perstorp Backs EU Mass Balance Rules for Traceable Chemical Feedstock Claims appeared first on Market Krystal.

Perstorp promotes Akestra polymer for heat-resistant recycled PET food packaging

admin — Tue, 06 Oct 2026 00:00:00 +0000

Perstorp is promoting its Akestra polymer for heat-resistant PET food packaging as the EU Packaging and Packaging Waste Regulation (PPWR) began applying on 12 August 2026. Akestra is described as PFAS-free, supporting applications up to 95°C and enabling up to 90% recycled PET content depending on construction. It can be co-extruded with recycled PET, and TCEP has endorsed Akestra 100 and 110 for use as external layers in heat-resistant PET trays.

Key facts

Companies	Perstorp, TCEP
Chemicals	Akestra, Akestra 100, Akestra 110, recycled PET, PET, PFAS
Timing	12 August 2026, 2030, 2035, 2040, 06 October 2026
Partners	TCEP
End uses	hot-fill containers, takeaway food trays, coffee lids, food and beverage packaging

Market context

PET is one of the most widely used plastics for food and beverage packaging, valued for clarity, strength and light weight, but standard recycled PET tends to lose heat resistance, which limits its use in hot-fill containers, takeaway trays and similar applications. Demand for packaging of this kind is driven largely by the food service, ready-meal and beverage sectors, and by regulation pushing producers toward higher recycled content and fewer hazardous substances. Specialty polymer layers that can be co-extruded with recycled PET are one way converters can meet heat-tolerance requirements without giving up recycled content. For buyers, such additives and multilayer solutions can shift sourcing decisions between virgin and recycled resin, and for competitors they raise the bar on performance claims, particularly around per- and polyfluoroalkyl substances (PFAS), which regulators are scrutinizing closely.

Source: official release on perstorp.com. Summary and context written by Market Krystal.

The post Perstorp promotes Akestra polymer for heat-resistant recycled PET food packaging appeared first on Market Krystal.

Perstorp Group reviews organisation amid weak demand and overcapacity

admin — Wed, 30 Sep 2026 00:00:00 +0000

Perstorp is taking further steps to align its organisation and ways of working with weak demand, structural overcapacity and shifting trade patterns in the global chemicals industry. About 140 employees in Sweden are expected to be affected. The final scope, the estimated global number of affected employees and the timing of the adjustments remain subject to consultation requirements with employee representatives and relevant authorities in each jurisdiction.

Why it matters

Restructuring by a chemical producer facing European cost disadvantages signals capacity and cost-base adjustments that could influence competitive supply and pricing in affected product lines.

Key facts

Companies	Perstorp, Perstorp Group
Location	Sweden
Timing	30 September 2026
Partners	employee representatives, relevant authorities
Chemicals	Pentaerythritol (CAS 115-77-5), Neopentyl glycol (CAS 126-30-7), Trimethylolpropane (CAS 77-99-6)

Market context

Perstorp is a specialty chemicals producer known for polyols and related derivatives such as pentaerythritol, neopentyl glycol and trimethylolpropane. These materials act as building blocks for alkyd and polyester resins, coatings, adhesives, plastics additives, lubricant esters and flame-retardant intermediates, so demand tends to follow construction, automotive, industrial coatings and general manufacturing activity. When producers across the sector face sluggish end markets and surplus capacity, especially from lower-cost regions, they often review plant utilisation, cost structures and staffing. Such adjustments can tighten supply in individual product lines over time, though the effect on prices depends on how much capacity is actually removed and how quickly imports or competitors respond. Buyers of polyols and specialty intermediates typically watch these moves for signs of firmer contract pricing or shifts in supplier availability.

Source: official release on perstorp.com. Summary and context written by Market Krystal.

The post Perstorp Group reviews organisation amid weak demand and overcapacity appeared first on Market Krystal.

Perstorp to raise polyol prices on neopentyl glycol and other grades

admin — Wed, 16 Sep 2026 00:00:00 +0000

Perstorp will raise prices on its polyol products, including neopentyl glycol, pentaerythritol and trimethylolpropane, citing a rapidly evolving global cost environment. The increase takes effect on October 1, 2026, or as permitted by existing contracts. Adjustments are +150 EUR/MT in EMEA, +8 cpp in the Americas and +175 USD/MT in APAC, with customers directed to their Regional Sales Manager for details.

Key facts

Companies	Perstorp
Chemicals	Neopentyl Glycol, Pentaerythritol, Trimethylolpropane
Timing	16 September 2026, 1 October 2026

Market context

Polyols such as neopentyl glycol, pentaerythritol and trimethylolpropane are multifunctional alcohols used as building blocks for alkyd and polyester resins, polyurethanes, UV-curable and industrial coatings, lubricants, and plasticizers. Demand is driven mainly by the construction and architectural coatings sector, industrial maintenance paints, automotive finishes, and packaging inks, so price moves in these grades tend to ripple through paint and resin makers. Producers typically pass through higher feedstock and energy costs by announcing regional price increases, often with effect dates tied to existing contract terms, which can tighten spot availability and encourage buyers to review forward contracts. Because these polyols are produced by a relatively small group of global suppliers, a price notice from one major producer is often read as a signal for the wider market, prompting competitors to assess their own pricing and customers to check inventory cover before the new level applies.

Source: official release on perstorp.com. Summary and context written by Market Krystal.

The post Perstorp to raise polyol prices on neopentyl glycol and other grades appeared first on Market Krystal.

Perstorp and Silver Fox Labeling present immersion label compatibility test results

admin — Tue, 15 Sep 2026 00:00:00 +0000

Perstorp and Silver Fox Labeling will present results of immersion testing that evaluated cable and panel identification materials in Synmerse DC-L and DC-Lx dielectric cooling fluids. The webinar covers how the testing was performed and which label solutions proved compatible with Synmerse fluids for use inside immersion cooling tanks. Sessions are scheduled for Tuesday, September 15, 2026, at 09:00-10:00 CET and 16:00-17:00 CET, with an on-demand recording available afterward.

Key facts

Companies	Perstorp, Silver Fox Labeling
Chemicals	Synmerse DC-L, Synmerse DC-Lx
Timing	2026-09-15, Tuesday, September 15, 2026, 09:00-10:00 CET, Tuesday, September 15, 2026, 16:00-17:00 CET
Partners	Silver Fox Labeling
End uses	Immersion-cooled data centers, Data center cooling

Market context

Dielectric cooling fluids such as the Synmerse range are engineered to circulate around servers and power electronics in immersion cooling tanks, where they absorb heat directly from components instead of relying on air. Demand for these fluids is driven mainly by data centers running dense AI and high-performance computing workloads, where conventional air cooling is becoming less efficient, and by other high-power electronics users. Because fluids in these tanks contact every surface, cable and panel labels must keep their adhesion and legibility without swelling, softening or leaching, so compatibility testing shapes which materials operators can specify. Such validation work tends to reduce qualification risk for fluid suppliers and label makers alike, and it can speed adoption of immersion systems across a fragmented supplier base.

Source: official release on perstorp.com. Summary and context written by Market Krystal.

The post Perstorp and Silver Fox Labeling present immersion label compatibility test results appeared first on Market Krystal.

Perstorp raises Oxo chemicals and plasticisers prices globally amid feedstock costs

admin — Mon, 14 Sep 2026 00:00:00 +0000

Perstorp Oxo AB is raising selling prices globally for a range of Oxo chemicals and plasticisers, effective immediately or as existing contracts allow, with all other terms unchanged. Increases include +180 EUR/mt for 2-Ethylhexanoic Acid and 2-Ethylhexanol in Europe, +0.05 USD/lb in the USA, and +210 USD/mt in the rest of the world. Perstorp cites sharply rising raw material and energy prices driven by the re-escalation of the Middle East conflict.

Key facts

Companies	Perstorp, Perstorp Oxo AB
Chemicals	2-Ethylhexanoic Acid, 2-Ethylhexanol, 2-Propylheptanol, n-Butyraldehyde, isobutyraldehyde, Emoltene 100, Emoltene 3GO, Propionic acid, Propionaldehyde, n-Butyric Acid, n-Valeric Acid, Isononanoic Acid
Timing	2026-09-14

Market context

Oxo chemicals such as 2-ethylhexanol and 2-ethylhexanoic acid are key intermediates in the production of plasticisers, which are added to PVC to make it flexible for products like cables, flooring, films and medical tubing. They are also used in coatings, lubricants and specialty esters. Demand therefore tracks construction, automotive and packaging activity. Oxo production relies on propylene and syngas, so swings in feedstock and energy costs feed directly into producer margins. When a major producer adjusts list prices across regions, buyers often face higher contract costs and may seek alternative suppliers or longer-term agreements, while rival producers commonly review their own pricing. Price moves of this kind can signal broader cost pressure through the plasticiser and specialty chemical chain.

Source: official release on perstorp.com. Summary and context written by Market Krystal.

The post Perstorp raises Oxo chemicals and plasticisers prices globally amid feedstock costs appeared first on Market Krystal.

Perstorp Polyols to permanently end production at Toledo, Ohio plant

admin — Wed, 02 Sep 2026 00:00:00 +0000

Perstorp Polyols, Inc. confirms the permanent discontinuation of production at its Toledo, Ohio facility, effective September 2, 2026. The company says Sales, Customer Service, Planning and Distribution operations in the U.S. are unaffected, and that production will be consolidated into fewer strategically positioned facilities. The decision affects approximately 70% of U.S. employees.

Why it matters

Removing Toledo polyol capacity shifts North American supply to Perstorp's remaining network, which the company says will maintain reliable supply to U.S. and other regional customers.

Key facts

Companies	Perstorp, Perstorp Polyols, Inc.
Chemicals	polyols
Location	Toledo, Ohio, United States
Timing	2026-09-02

Market context

Polyols such as neopentyl glycol, trimethylolpropane and pentaerythritol are multifunctional alcohols used as building blocks for polyurethane foams, coatings, alkyd and polyester resins, lubricants and specialty esters. Demand is driven largely by construction and insulation, automotive and industrial coatings, furniture and packaging, so producers' operating rates tend to track those sectors. When a North American producer closes a plant, regional supply is typically concentrated in the remaining sites, which can tighten local availability and lengthen lead times for customers that relied on the closed site. Buyers often respond by qualifying alternative sources, reviewing safety stock and reassessing contract terms, while competing producers may gain share in the affected region. Actual price effects depend on how much capacity leaves the market and on the balance of regional demand.

Source: official release on perstorp.com. Summary and context written by Market Krystal.

The post Perstorp Polyols to permanently end production at Toledo, Ohio plant appeared first on Market Krystal.